17.07.180 - Accessory Structures to Non-Residential Buildings.

In addition to the design standards contained in 17.07.050 and 17.07.120 the following design standards apply to all Accessory Structures to non-residential Buildings.

A.

Orientation. Except for fuel pump canopies, Accessory Structures shall not front on a Street, and shall be located in the rear yard in a manner that minimizes their impact on adjacent Uses.

B.

Height and Area Requirements.

1.

Except for fuel pump canopies, Accessory Structures shall not exceed the height of the Primary Building.

2.

Except for fuel pump canopies, Accessory Structures shall have a maximum area of 20% of the Primary Building.

C.

Materials. Accessory Structures shall use materials of the same or higher quality and durability as the materials used on the Primary Building it serves.

D.

Roofs. Accessory Structures shall incorporate the same roof type, materials, and pitch used on the Primary Building it serves.

E.

Fuel Pump Canopies.

1.

Fuel pump canopies shall incorporate similar materials used on the Primary Building it serves.

2.

Canopy lighting shall be recessed and flush with the underside of the canopy.

3.

Columns shall be integrated with the design of the Primary Building it serves.

(Ord. No. 2020-02, § IV(Exh. C), 1-8-2020; Ord. No. 2022-08, § I(Exh. A), 4-13-2022; Ord. No. 2022-16, § 1(Exh. A), 9-14-2022; Ord. No. 2023-27, § 1(Exh. A), 9-12-2023)

Note— See editor's note at § 17.07.090.