17.07.170 - Indoor Storage Climate Controlled Building.

In addition to the design standards contained in 17.07.050 and 17.07.120 the following design standards apply to all Indoor Storage Climate Controlled Buildings. A.

Materials.

1.

Primary Materials. Additional Primary Materials shall include:

a.

Natural or synthetic stone;

b.

Integral color CMU;

c.

High-quality pre-stressed concrete systems;

d.

Finished and treated tilt-up concrete panels; or

e.

Insulated metal panels.

2.

Secondary Materials. Additional Secondary Materials shall include:

a.

Architectural metal paneling;

b.

Unfinished or untreated tilt-up concrete panels;

c.

Standard single-tee or double-tee concrete systems; or

d.

Float finish EIF'S.

B.

Façades.

1.

All facades shall have the same level of architectural design and exterior materials.

2.

The Primary Facade shall feature a primary entrance that includes a Building canopy, awning or similar weather protection over the primary entrance that extends at least four (4) feet from the Façade.

3.

The Primary Façade and primary entrance shall have enhanced design. The primary entrance shall be the primary architectural element on the façade.

4.

All Buildings shall incorporate wall façade depth variation at least every forty feet (40'). Façade depth variation shall be a minimum depth of two (2) feet every forty (40) feet of façade width of the bottom 3 stories. In addition, at least two of the following design elements are required:

a.

Variations in roof form and parapet height;

b.

Distinct changes in texture and color of wall surfaces; or

c.

Vertical accents or focal points.

5.

Exterior ground floor overhead doors are prohibited along the Primary Façade.

C.

Windows. The following window design standards apply to all Indoor Storage Climate Controlled Buildings and supersede the general, non-residential, minimum window percentages contained in this Chapter.

1.

The Primary Façade shall have a minimum of 40% windows.

2.

The side and rear Façades shall have a minimum of 20% windows.

D.

Setbacks. The following setbacks apply to all Indoor Storage Climate Controlled Buildings located in the Downtown District. All Indoor Storage Climate Controlled Building located in the Commercial Corridor shall comply with the setbacks found in 17.07.030.

1.

Front Yard: 0' - 10'

2.

Side and Rear Yard: 5'

E.

Fencing. The following fencing design standards apply to all Indoor Storage Climate Controlled Buildings and supersede the general, non-residential fencing standards contained in this Chapter.

1.

The entire property shall be fenced with an eight (8') non-cuttable transparent metal fence from the front plane of the front façade around the entire side and rear property lines. Chain link and vinyl fences are prohibited.

2.

All vehicle access into the Development shall be through an access-controlled gate.

F.

Loading Areas.

1.

Loading areas shall be configured to avoid disruption of primary vehicular access and circulation on the site and shall be separated from customer parking, pedestrian areas, and main Drive Aisles.

(Ord. No. 2022-08, § I(Exh. A), 4-13-2022; Ord. No. 2022-16, § 1(Exh. A), 9-14-2022; Ord. No. 2022-08 , § I(Exh. A), 4-13-2022)

Note— See editor's note at § 17.07.090.