17.03.030 - Residential Multiple (RM) district.

A.

Purpose. The purpose of the Residential Multiple (RM) district is to provide a district where Multi-Family housing may be Developed with varying residential densities.

B.

Uses. No Building, Structure, Site, or land shall be used or Developed except in accordance with the adopted Land Use Matrix as found in Section 17.03.010.

C.

Standards.

1.

Minimum Area.

a.

The minimum area of any Lot for Multi-Family Development in this district is two (2) acres.

b.

The minimum area of any Lot for detached Single-Family residential Development in this district is 6,000 square feet.

2.

Minimum Width. Width regulations are as follows:

a.

The minimum width of any Lot or Parcel used for a Multi-Family Development shall be 250 feet at all points along the length of the property from the Front Property Line to the Rear Property Line.

b.

The minimum width of any new Lot used for Single-Family detached homes is 50 feet at all points along the length of the property from the Front Property Line to the Rear Property Line.

c.

The land use authority may decrease the minimum Lot width along the Frontage of Single-Family residential Parcels that will be accessed from a Cul-de-Sac.

3.

Maximum Building Height. The maximum Building Height for a Multi-Family Structure is 65 feet.

4.

Required Setbacks. See Chapter 17.07.

5.

Minimum Number of Units. The minimum number of units for any Multi-Family Development shall be 50 units.

6.

Residential Density. The maximum Density for any Multi-Family residential Development in the RM district shall be 25 units per acre.

(Ord. No. 2020-02, § IV(Exh. C), 1-8-2020; Ord. No. 2021-06, § III, 5-26-2021; Ord. No. 2022-08, § I(Exh. A), 4-13-2022)