The text
A.
Purpose. The purpose of the R1 district is to provide for low Density Single-Family, residential housing neighborhoods on Lots not less than six thousand (6,000) square feet in size.
B.
Uses. No Building, Structure, Site or land shall be used or Developed except in accordance with the adopted Land Use Matrix as found in Section 17.03.010. Uses shall be Compatible with the existing Scale and intensity and shall preserve the existing character of the neighborhood.
C.
Standards.
1.
Area. The minimum area of any new Lot in this district is (6,000) square feet.
2.
Minimum Width. Width regulations are as follows:
a.
The minimum width of any Lot shall be fifty (50) feet at all points along the length of the property from the Front Property Line to the Rear Property Line.
b.
The Land Use Authority may decrease the minimum Lot width along the Frontage for residential Parcels accessed from a Cul-de-Sac or turnaround area.
3.
Maximum Height. The maximum Height for any Structure is thirty-five (35) feet.
4.
Required Setbacks. See Chapter 17.07.
(Ord. No. 2020-02, § IV(Exh. C), 1-8-2020; Ord. No. 2024-01, § I(Exh. A), 2-7-2024)