17.03.240 - South Salt Lake City Police Department (SSLC-PD) Overlay District.
Part of the Code of Ordinances of South Salt Lake, UT.
The text
A.
Purpose. The South Salt Lake City Police Department (SSLC-PD) Overlay District provides Development standards for specific Accessory Structures necessary for safe City Police Department operations.
B.
Establishment. The SSLC-PD Overlay District is established to:
1.
To support appropriate addition of Accessory Structures to City Police Department sites to make additions Compatible with the SSLC Police Department Primary Use and Structures surrounding the site;
2.
To minimize human interface with hazardous, contaminant, or otherwise unsafe conditions or materials; and
3.
To facilitate daily SSLC Police Department operations.
C.
Applicability. A property Owner shall follow the provisions of this Section when Developing or changing the Use of property within the district.
D.
Uses. In the SSLC-PD Overlay District, Uses, Buildings, Structures or land shall only be used or Developed in a nature accessory to the Primary Use of the subject property.
E.
Standards. Specific standards for the SSLC-PD Overlay District are as follows:
1.
Permissible Accessory Structure: One Accessory Structure is allowed in the district to support an Accessory Use to (a) minimize SSLC Police Department personnel interface with hazardous, contaminant, or otherwise unsafe conditions or materials; and (b) facilitate daily SSLC Police Department operations. An Accessory Structure serving an appropriate Accessory Use under this Section may be prefabricated—including a container structure—or constructed on-site. All Accessory Structures shall be permanently affixed to a foundation. An Accessory Structure shall only be used for temporary indoor storage and shall not be used for human occupancy other than for and during incidental processing of custodial property.
2.
Grading and Drainage: An Accessory Structure shall only be constructed on a site graded and designed to meet MS4 permit standards, all to the City's Engineering standards.
3.
Maximum Height: Accessory Structure height shall not exceed 11 feet.
4.
Size and Siting: Accessory Structure Gross Floor Area shall not exceed 420 square feet per Accessory Structure. An Accessory Structure must be located within three (3) feet of a Side Property Line and within three (3) feet of the Rear Property Line, but shall not obstruct a Right-of-Way sight-distance triangle or Drive Aisle, including the Accessory Structure's door-swing paths.
5.
Construction: An Accessory Structure shall match the exterior color of the primary SSLC Police Department Structure within the district and shall employ an anti-graffiti coating on all vertical, exterior surfaces. An Accessory Structure may incorporate electrical service for lighting, HVAC, and as necessary to support incidental processing of custodial property within the Accessory Structure. All exterior lighting shall be directed downward and away from any adjacent Residential Uses. HVAC equipment shall not emit noise levels in excess of 55dBa at the Property Line.
6.
Security: Appropriate video camera surveillance shall be directed onto any Accessory Structure. The SSLC Police Department shall continuously record activity in the vicinity of the Accessory Structure and its immediate surrounding area to deter vandalism and ensure the protection of City and custodial property. The Accessory Structure shall be appropriately secured from unauthorized access.
(Ord. No. 2020-02, § IV(Exh. C), 1-8-2020)