17.03.120 - Mixed-Use district.

A.

Purpose. The purpose of the Mixed-Use district is to encourage a mixture of Compatible Uses and Structures that will enhance the vitality and diversity of the area. Development should accommodate and respect surrounding land Uses by providing a gradual transition from more intensive Uses to lower Density Residential Uses that are adjacent to a potential Mixed-Use site.

B.

Uses. No Building, Structure, Site, or land shall be used or Developed except in accordance with the adopted Land Use Matrix as found in this Chapter.

C.

Standards. Standards for the district are as follows:

1.

Minimum Area. The minimum area of any Lot for Multi-Family Development is two (2) acres.

2.

Minimum Width. Width regulations are as follows:

a.

The minimum width of any Lot for a Multi-Family Development shall be 250 feet at all points along the length of the property.

b.

The land use authority may decrease the minimum Lot width along the Frontage for residential Parcels when accessed from a Cul-de-Sac.

3.

Maximum Building Height. The maximum Building Height for any Structure is based on the Building Form as more completely detailed in Chapter 17.07.

4.

Required Setbacks/Build-To Standards are detailed in Chapter 17.07.

5.

Minimum Number of Units. The minimum number of units for any Multi-Family Development shall be 50 units.

6.

Residential Density. The maximum Density for any Multi-Family Development in the district shall be 25 units per acre.

7.

All Multi-Family residential Developments in the district shall have a minimum area of 4,000 square-feet of commercial or Retail space on the ground-floor of the Primary Façade.

(Ord. No. 2020-02, § IV(Exh. C), 1-8-2020; Ord. No. 2021-06, § VII, 5-26-2021; Ord. No. 2022-08, § I(Exh. A), 4-13-2022; Ord. No. 2022-16, § 1(Exh. A), 9-14-2022)

Note— See editor's note at § 17.03.080.