Skip to content
52

10-21-9: - COMPLETE APPLICATION FOR PRELIMINARY SUBDIVISION PLAN FOR A MULTIPLE-FAMILY RESIDENTIAL SUBDIVISION, COMMERCIAL SUBDIVISION, OR MANUFACTURING USE SUBDIVISION (NOT INCLUDING SINGLE-FAMILY DWELLING, TWO-FAMILY DWELLING, OR TOWNHOME SUBDIVISIONS):

Part of the City Code of Riverdale, UT.

Local law · Updated June 10, 2026 · 1,041 sections

The text

A.

Required: Upon completing the requirements set forth in section 10-21-8 of this chapter, each person who proposes to subdivide land in the city shall prepare a preliminary plan of such subdivision and shall submit four (4) large (24"x36") sized set of prints, one (1) small (11"x17") sized set of prints, and one digital full set submittal of all preliminary plans and plat thereof to the planning commission and city. One print shall be delivered by the city staff to each of the following for the information and recommendation of such officials and departments: city engineer, fire department, police department, public works departments, city administration, and other pertinent city departments.

B.

Preliminary plans must be received by the city no later than the end of the day ten (10) business days prior to the next scheduled planning commission meeting in order to allow sufficient time to be reviewed and to receive recommendations from the foregoing listed departments.

C.

Scale; Information Required: The preliminary plan shall be drawn to a scale not fewer than one hundred feet to the inch (1" = 100'), and shall show:

1.

The proposed name of the subdivision.

2.

The location of the subdivision as forming a part of a larger tract or parcel where the plan submitted covers only a part of the applicant's tract, or only a part of a larger vacant area. In such case, a sketch of the prospective future street system of the unplanned parts shall be submitted and the street system of the part submitted shall be considered in the light of adjustments and connections with the future street system of the larger area.

3.

Sufficient information to locate accurately the property shown on the plan.

4.

The name and address of the applicant; the engineer or surveyor of the subdivision, and the owners of the land immediately adjoining the land to be subdivided.

5.

Contour map at appropriate intervals where required by the planning commission.

6.

The boundary lines of the tract to be subdivided.

7.

The location, widths, and other dimensions of all existing or platted streets and other significant features such as railroad lines, watercourses, exceptional topography, and buildings within the tract or within two hundred feet (200') of the tract to be subdivided.

8.

Existing and proposed sanitary sewers, storm drains, water supply mains and culverts within the tract or within one hundred feet (100') thereof.

9.

The location, widths and other dimensions of proposed streets, alleys, easements, parks, and other open spaces and lots, with proper labeling of spaces to be dedicated to the public.

10.

North point, scale and date.

D.

Decision of Planning Commission: The planning commission may approve or reject the preliminary plan and plat, or grant approval with the conditions stated by the planning commission. Approval of the preliminary plan and plat by the planning commission may not constitute final acceptance of the subdivision by the planning commission. One copy of the approved preliminary plan and plat shall be retained in the city offices and one copy shall be made available to the applicant, if so requested. The planning commission's approval of the subdivision preliminary plan and plat shall be the authorization for the applicant to proceed with the finalization of plans and specifications of this chapter and with the preparation of the final plat and plan.

E.

Improvement Plans: Prior to the construction of any improvements required in section 10-21-15 of this chapter, or to the submission of financial guarantees, the applicant shall furnish to the city engineer all subdivision improvement plans, information, and data necessary for said improvements. These plans shall be examined by the city engineer and shall be approved if the city engineer determines them to be in accordance with the requirements of section 10-21-15. No construction of buildings may begin until after recording of the final plat.

F.

Term of Approval: Approval of the preliminary plan and plat by the planning commission shall be valid for a maximum period of twelve (12) months after approval, unless upon application of the applicant, the planning commission grants the applicant a six (6) month extension. If the final plat has not been recorded within the twelve (12) month period, the preliminary plan and plat must again be submitted to the planning commission for reapproval.

(1985 Code § 19-40-5, amd. Ord. 815, 9-25-2012; amd. Ord. 977, 1-2-2024; amd. Ord. 988, 11-6-2024)