ATTACHMENT 10. - CHECKLIST FOR MAJOR LAND DEVELOPMENT/MAJOR SUBDIVISION/MINOR SUBDIVISION AS-BUILT DRAWINGS
Part of the Code of Ordinances of Tiverton, RI.
The text
Twelve (12) sets of plans
General Information (on both Initial and Final As-Built drawings) 1.
True north arrow, and graphic scale (minimum of 1 inch = 100 feet, or as otherwise required) on 22-inch by 32-inch sheet(s) and a general location map/locus showing the relationship of the parcel to the area within a half-mile radius.
2.
The following information in Title Block: subdivision name, Assessors Map/Plat, Block, and Card/Lot number(s), name, address and telephone number of engineer and/or land surveyor, date of plan preparation, with revision date(s).
3.
Street names, lot numbers, addresses, if available.
Initial — Prior to recording of Final Plan: 1.
Location of street rights-of-way and travel lanes with respect to lot/assigned area property/boundary lines, including profiles with elevations of streets.
2.
Location of proposed final shoulder grades from proposed edge of cape cod berm to street right-of-way.
3.
Location of existing structures with respect to lot/assigned area property/boundary lines.
4.
Location of existing/proposed easements with respect to lot/assigned area property/boundary lines.
5.
Horizontal and vertical locations of proposed underground and above-ground utilities, including service connections.
6.
As-built drawings with the above information shall be signed, dated and stamped by a RI-licensed professional engineer as to drainage engineering details and by a RI-licensed professional land surveyor as to all location and elevation dimensional details.
Final — After completion of all improvements/each phase: 1.
Location of street rights-of-way and travel lanes with respect to lot/assigned area property/boundary lines, including profiles of streets with elevations.
2.
Location of all surveyors' permanent bounds (6" x 6" x 4', preferably concrete or granite) with offset data, as required.
3.
Location of existing structures with respect to lot/assigned area property/boundary lines.
4.
Location of existing/proposed easements with respect to lot/assigned area property/boundary lines.
5.
Stormwater Drainage System Details:
a.
Locations, inverts, and bottom elevations (where appropriate) of all catchbasins, manholes, holding tanks, retention/detention ponds, etc.
b.
Sizing and location of all stormwater drain lines.
c.
Location and details of all points of stormwater discharge, trenches, infiltration systems, etc.
6.
Horizontal and vertical locations of underground and above-ground utilities, including service connections and fire storage tanks, if applicable.
7.
Horizontal and vertical locations of subsurface drainage pipes.
8.
As-built drawings with the above information shall be signed, dated and stamped by a RI-licensed professional engineer as to drainage engineering details and by a RI-licensed professional land surveyor as to all location and elevation dimensional details.